Steel wall decorations are incredibly popular these days. They give your interior a cool, modern look and are often beautiful eye-catchers in your home. But how do you actually hang such a heavy steel decoration safely without too much hassle? In this blog I will give you a step-by-step guide so that you can enjoy your new decoration in no time!
Step 1: Gather required materials
To start, make sure you have everything you need. You will need:
- Drill with the correct drill bit (depending on the type of wall)
- Plugs and screws (specially for the substrate)
- Spirit level or a laser spirit level
- Pencil for making markings
- measuring tape
- Screwdriver
- Possibly hooks or hanging system for the type of wall decoration
Tip: Some wall decorations have their own hanging system. Always check if this is suitable for your wall type!
Step 2: Choose the right hanging method for your wall
Steel wall decorations can be quite heavy, so it is essential to consider the type of wall you want to hang it on. Choose the right screws and plugs for your situation:
- Concrete or brick wall: Use strong plugs and heavy screws that are especially suitable for hard materials. A hammer drill is often needed here.
- Plaster wall: Use special plaster plugs or hollow wall plugs for a firm attachment.
- Wooden wall: You can usually screw directly into wood, but make sure your screws are long enough to support the weight.
Step 3: Determine and mark the location
- Measure and mark : Determine the place where you want to hang the decoration and measure the correct height. A tape measure and spirit level are essential to ensure that the decoration hangs straight.
- Marking the drill holes : Hold the decoration in the right place against the wall and mark the places where the screws should go. Use a pencil to lightly mark the drill holes.
Tip: If necessary, use masking tape to mark the position, so you can indicate the correct places without using pencil lines.
Step 4: Drill the holes
Now it's time to drill! Always check that you don't hit any pipes or electrical cables. Many people use a pipe locator, a handy tool to prevent damage and accidents.
- Choose the right drill bit for the wall material.
- Drill on the markings you made.
- Place the plugs in the holes. Make sure they are secure by tapping them lightly with a hammer, but be careful not to hit too hard to prevent damage.
Step 5: Attach the wall decoration
Now comes the fun part: hanging the decorations!
- Screw the hooks or screws into the plugs . Make sure they are tight, but be careful not to over tighten, as this can cause damage to the wall.
- Hang the decoration on the attached hooks or screws. Check that it is firmly attached by pulling it gently.
- Use a spirit level to see if everything is hanging straight. You can still make minor adjustments here if necessary.
Step 6: An additional security (optional)
For heavier wall decorations or decorations that hang above high-traffic areas (such as above a couch or bed), you may want to add extra security. Think of special hanging brackets or safety screws, so that the artwork cannot accidentally fall.
And there you have it!
Your steel wall art is now safely and securely hanging on your wall, ready to brighten up your space! Hanging heavy decorations can seem daunting, but with the right preparation, it is absolutely doable. By using the right materials and steps, you can ensure that your artwork not only hangs beautifully, but is also securely attached.
Good luck hanging your steel eye-catcher, and enjoy the result!
Do you have any questions about hanging your wall decoration or would you like some extra advice? Feel free to contact us via the contact page – we are happy to help you!
